價格：免費
更新日期：2017-12-21
檔案大小：1.8M
目前版本：1.0.0
版本需求：Android 4.0.3 以上版本
官方網站：http://www.monkeytech.cz
Email：obchod@monkeytech.cz
聯絡地址：隱私權政策
Monkeytech Configurator helps you configure your Monkeytech device for the first time and connect it to your Wi-Fi network. For the application to work properly it is needed to follow these steps:
Before you proceed with the configuration, the device has to be set to the installation mode. That is indicated by the status LED lighting up in red color after powering the device on. If the LED is not red and therefore the device is not in the installation mode, power the device off, press and hold the reset button while powering it back on again by inserting the microUSB cable. As soon as the LED lights up in red, you can release the reset button. This configuration application will now connect to the device and will allow you to select a WiFi network to which the device will be configured to connect. After selecting an SSID of the desired network, you will be prompted to enter password for the network. In case you ever need to connect the device to different network, you have to reset the device to the installation mode again.